Even if the product quality of the furniture veneer is good, if we have problems during the construction process, it will cause seams to appear in the paper.
During the construction process, it is in a state of suction and expansion. After paving, the wallpaper glue begins to dry, the water decreases, and the wallpaper will shrink, which will cause the seams of the wallpaper to open, and the wall can be seen directly. Then, during the flower seam process, if the veneer seam is too different in color from the rest of the veneer, the veneer will fade across the gap and the veneer seam will look more pronounced.
In addition, if the base layer of the wall is not smooth, the seams of the furniture veneer will be very obvious under the light.
Method for veneer of technical veneer paper and board
When we use technical wood veneer on the board, we need to use the gluing process, so what are the methods?
One bonding process method is cold pressing, which can be applied to the base material of technical veneer veneer, as well as to the base material and decorative panels. The amount of glue applied is slightly larger than that of the hot pressing method, and it is stacked for 24 hours after the pressure is released to further solidify the resin. Another method is the hot pressing method, which is to apply glue on one side of the substrate or decorative board, which is similar to the veneer. A symmetrical layer should be pasted on the back of the substrate to prevent warping and deformation of the product. If in order to reduce the product cost and simplify the process, the decorative board and four veneers can be formed into a slab, and the gluing can be completed at one time.
Although the hot-pressing adhesive has high production efficiency and good gluing performance, the surface flatness is poor, and the roughness and unevenness of the material are easily reflected on the surface of the decorative board. Therefore, under the conditions of the bonding strength, the low-temperature and low-pressure gluing process should be used as much as possible.
Selection of decorative materials such as furniture veneer In fact, there are many types of upholstery materials such as furniture veneer. In order to achieve the desired artistic effect in the indoor environment, it is necessary to choose materials flexibly and innovate the combination of art.
For venues with different functions, the decoration style and space atmosphere are also different, which of course also affects the choice of decoration materials. When choosing indoor building materials, the influence factors of geographical location and natural climate should be fully considered, so that people can survive in a healthy and safe environment under harsh external climatic conditions. The social status, standards and self-positioning of buildings are objective factors that affect the choice of decorative materials such as furniture veneer.
In the process of building decoration, under the condition that the main site functions are met, other auxiliary sites have more functions, and their particularity makes the material requirements different.