Related applications of furniture veneer

This furniture veneer product is a commonly used furniture decoration material, but in application, care should be taken to avoid some problems.

When using furniture veneers, pay attention to ventilation, try to avoid placing the wood in the vents, prevent cracking, and seal the oil on the surface as soon as possible. In order to prevent the deformation of the furniture veneer, the moisture should be replenished in time. After laying, do not open doors and windows to allow the walls to dry quickly. When drying, pay attention to fire prevention, explosion-proof, and anti-virus, and the decorative materials must be selected according to the standard grade requirements.

These should pay special attention to these application problems of furniture veneer to ensure that we will not have quality problems when using them.

Partial collage method of technical veneer veneer In order to improve the aesthetics of the technical wood veneer paper, the method of partial collage can also be used to deal with it. What should be done specifically?

We use technical wood veneer paper for local decoration, you can choose some patterns or papers with strong colors and outstanding texture effects to try, such as technical wood veneer paper and paint cross use, or striped decorative paper inclined, or choose flower wallpaper pattern as Hanging pictures to decorate the wall will achieve unexpected results. However, it should be noted that not all papers are suitable for this, and the texture and texture of the wallpaper surface should be selected first.

Partial collage of technical wood veneer paper is a special line, color and texture change, which makes the wall get a good decorative effect.

Processing and curing time of technical veneer veneer The curing time is a very important processing condition in the production and processing process, which refers to the time required for the press to reach the specified pressure until the press is turned on.

The curing time of general technical wood stickers can be divided into resin flow time and resin curing time. Among them, during the curing time of the resin, the viscosity of the molten resin will become larger and larger, and after the resin is heated for about 10-20 s, the cross-linked structure in the three-dimensional direction is gradually formed. There is no obvious boundary between this process and the flow process of the resin. There is a cross transition stage. After the press is closed, the resin is completely cured and the completion time is 30-60s.

In addition, under the action of the temperature and pressure of the resin flow time, the resin melts and flows along the hot platen, and the resin on the contact surface with the substrate also flows and penetrates. The resin flows to form a resin layer with a uniform surface. Depending on the temperature, the required time is about 10s.